P1-set BACKLIGHT lightness , 1-3, 1 most dark, 3 most light
p2-set unit, british type mile/hour or kilometer/hour. 0 is km/h. 1 is mile /hour,
P03- set battery votlage, 24v/36v/48v/60v
P4-SLEEPING TIME,0-60, in minutes, default setting 5minutes , 0 will not sleep.
P05- SET gears mode , default setting 0, that is 3 gears , speed ratio-10%,70%,100%
P6- rim size , unit in inch,
p7-set motor magnetic poles ratio -please ask your motor supplier this, please account according to motor magnetic pairs and reduction ratio-default setting 30 .
larger data speed will be slow, little data speed will be higher,
p08-set speed limit ratio, 0-100km/h, set 100 means no speed limit
P9-set start mode, ZERO start or non -zero start, 0 means zero start, 1 means non zero start,
p10-set driven way, 0 is pedal only, 1 is throttle only, 2 means both has effect , throttle work first
p11-set pedal sensitivity, 1-5, 1 is most sensitive, 5 is most insensitive
p12-pedal start strength , 1-5, 1 is most weak.
P13-PAS SENSOR type, 5 points, 8 or 12.
p14-controller current limit, 1-20a, default setting 12a. if need change please talk with us in advance.
P15-set controller low voltage protection point,
P16--set ODO zero clear , come into this interface and long press mode button , odo will clear to zero
P17--set cruise mode, 0 means no auto cruise, 1 means has auto cruise, keep a speed for 6 seconds, vehicle will go into auto cruise,
ร้านค้า 
รวมบทความและผลงาน 
ขอขอบพระคุณทุกท่านที่แวะมาเยี่ยมชม 
หน้าร้าน
โครงงาน วิจัย พัฒนา อื่นๆ
